Products
4 In 1 Integrated IPX3 To IPX6 Waterproof Test Chamber IEC 60529 Figure 4 And Figure 6
Products Description
4 In 1 Integrated IPX3 To IPX6 Waterproof Test Chamber IEC 60529 Figure 4 And Figure 6
Product Information
Application Background: The destruction of products and materials by natural water (rain, sea, river, etc.) causes an incalculable economic loss every year. The damages caused mainly include corrosion, fading, deformation, strength drop, expansion, mildew, etc., especially electrical products are easily broken into fires due to short circuits caused by rain. Therefore, enclosure protection water testing for specific products or materials is an essential and critical process.
General application areas: outdoor lighting, household appliances, auto parts and other electronic and electrical products.
Equipment function: The main function of the equipment is to test the physical and other related properties of electronic and electrical products, lamps, electric cabinets, electrical components, automobiles, motorcycles and their parts and components under simulated climatic conditions. After the test, judge whether the performance of the product meets the requirements by the verification, so as to facilitate the design, improvement, verification and factory inspection of the product.
Standard: IEC60529:1989 +A1:1999 +A2:2013 <Degrees of protection provided by enclosures (IP Code)> IPX3, IPX4, IPX5, IPX6 test, figures 4 and figure 6.
Features
1.Suitable for product IPX3, IPX4, IPX5, IPX6 waterproof rating test.
2. The outer casing is made of domestic high-quality steel plate, and the surface is painted with baking varnish, which is beautiful and durable.
3.The inner chamber and turntable are all made of SUS304# stainless steel plate to ensure long-term use without rust.
4. There is a transparent observation window on the door, and LED lighting inside of the chamber, easy for operator to observe the internal test.
5. IPX34: Configured R200mm and R400mm oscillating tubes according to the specifications of IEC60529 figure 4 (as shown below)
6. IPX56: Configured a spray nozzle according to the specifications of IEC60529 figure 6 (as shown below):
Technical parameters:
Configured with a waterproof socket inside the chamber for client to power on sample during test
±60° (IPX3),
approximately ±160°(IPX4)
(Note: standard requires IPX3:120°; IPX4: almost 360°, but due to there is turntable under oscillating tube during test, so 360° can not achieved during actual testing, if without turntable, then 360° can be achieved)
120°(IP3)
180°(IP4)
The ground is level, the drainage is smooth, floor and wall are waterproofing,
Ground bearing capacity is not less than 200kg/㎡
Well ventilated
No strong vibration around the device
No strong electromagnetic field around the device
No flammable, explosive, corrosive substances and dust around the equipment
Appropriate use and maintenance space is left around the equipment:
Rear side, left and right side, top of the equipment: 800mm; front side of equipment: 1400mm
Temperature:5℃～35℃
Relative humidity: ≤85%
Air pressure:86kPa～106kPa
1. The user is required to configure the leakage protection air switch of the corresponding capacity for the equipment at the installation site, and the switch must be used independently for the device.
2. It is forbidden to use the knife switch or power socket.
3. The leakage protection air switch is not more than 2 meters away from the equipment.
1. The user is required to configure the water source for the equipment at the installation site, the water pressure is not less than 0.2Mpa, and the 4-point faucet is installed.
2. The position of the faucet is no more than 2 meters away from the equipment.
Technical Parameters
Basic Parameters
Inner Chamber Size
L1000*W1000*H1000mm
Outer Chamber Size
L1480*W3800*H1800mm
Turntable Diameter
￠400mm
Turntable Maximum Load Bearing
10KG
Turntable Speed
1-5r/min (adjustable)
Turntable Rotation Method
Always positive / positive and negative alternate
Flow Adjustment Method
Manually adjust flow by adjusting flow meter on the panel
Test Time
0-999 min
Power supply for sample
Equipment dimensions
Approx.2770mm(L)*1330mm(W)*1750mm(H)
Total Weight
Approx. 350kg
Required site place
3.2m(L)*2m(W)*2m(H)
IPX34 Oscillating Tubes Parameters
Oscillation Tube
R200 mm and R400mm
Distance between Nozzle Sample
Within 200mm
Spray Aperture Spacing
50 mm
Oscillating Tube Swing Angle
Angle Between Two Holes
Needle Hole
φ0 .4 mm
Oscillating Speed
IPX3: 15times/min; IPX4: 5times/min
Water Flow of Each Hole
0.07 L/min +5%
Spray Pressure
80-150Kpa
IPX56 Jet Nozzle Parameters
IPX5 Nozzle Jet Aperture
6.3mm
IPX6 Nozzle Jet Aperture
12.5mm
IPX5Jet Flow
12.5±0.625
IPX6 Jet Flow
100±5L/min
Water Pressure (Mpa)
Adjusted according to the specified water flow
Jet Distance
2.5M (nozzle away from the center of the turntable)
Nozzle Fixed Method
Mechanical fixing
Electrical Parameters
Power Supply for Equipment
380V, 50Hz
Equipment Power
3.0KW
Safety Protection Function
Leakage protection, water shortage protection, short circuit protection
Conditions of Use
The following conditions are guaranteed by the user and the corresponding connection is completed.
Use of Space
Environmental Conditions
Power Supply Conditions
Voltage, Frequency
AC380V±10%; 50Hz±10%; three-phase four-wire + protective ground wire
Power
3.0kW
Protective Grounding Resistance
Grounding resistance of protective grounding wire is less than 4Ω
Power Switch
Water Source
