Products
IEC 62368-1 Clause 5.4.2 20KV Impulse Voltage Generator And Voltage Waveform Attenuator Test Equipment
Products Description
IEC 62368-1 Clause 5.4.2 20KV Impulse Voltage Generator And Voltage Waveform Attenuator Test Equipment
Product Information:
Standard: Conform to IEC 62368-1:2018 clause 5.4.2,5.5.8 and Annex D, circuit 1 and circuit 2 of Table D.1, Annex G.10, etc., IEC 60950-1:2013 clause 2.10.3.9, 5.2, reference 2 of table N.1, IEC 60950-1:2013 clause 6.2.2.1 and 7.4.3 reference 1 of table N.1, and etc.
Application: It is used to detect the transient over voltage of the components and the electrical clearance and the creepage distance.
Test sample: Household appliance, Audio, video and similar electronic apparatus.
Feature: The sample breakdown will produce a spark and acoustic, instrument peak voltage than the no-load voltage is decreased substantially (close to zero), when applying the same voltage in the next test, it will also show the above phenomenon.
Impulse wavefront time: 1.2 µs ± 30 %;
Half value of after wave time: 50 µs ± 20 %
Please note that the waveform should be checked on an external oscilloscope
Low: 300V~2,500V;
High: 2,500 V~ 20,000V
Technical Parameters:
Model
SN1104-20KV
DC high voltage
Max. 20kV
Impulse voltage wave
Instrument internal resistance
Resistance matches ITU-T K.44
Peak voltage:
Impact interval time
10 ~ 99s
Impact cycles
1 ~ 9999
Polarity
Positive and negative
Working power source
Rated voltage: ~ 220V±10%, 50/60Hz
