Products
IEC60335-2-15 Clause 19.101 Cordless Kettle Comprehensive Life Test Equipment
Products Description
IEC60335-2-15 Clause 19.101 Cordless Kettle Comprehensive Life Test Equipment
Product Information:
This Automatic Cordless Kettle Comprehensive Life Test Equipment is designed and manufactured according to the standard requirement of IEC60335-2-15 clause 19.101, 19.102 and 22.103, and etc.
It is used to test the comprehensive life test, verification and reliability and durability of the whole machine of the cordless kettle for household and similar purposes
The equipment is controlled by Mitsubishi PLC and operated by a 7-inch color touch screen. Built-in adjustable load, adjustable current and voltage, can guarantee input 0.85 times or 1.15 times power; the equipment can automatically add water, match boiling water test and dry boiling water cooling test; the equipment can realize automatic power on and dry boiling, automatic water injection, automatic water pouring function to realize 100 times of fully automatic water boiling operation, and automatically stop when the number of times is reached.
Technical Parameters:
Including dry boiling (self-cooling), dry boiling (water-cooled), plug (with electricity), plug (without electricity), and circulating boiling water:
1. Dry boiling (self-cooling):start→pour water→reset→start dry boiling→dry boiling end (thermostat jumps off)→natural cooling until the temperature controller reset→cycle dry boiling；
2. Dry boiling (water-cooled): start→pour water→start dry boiling→dry boiling ends (thermostat jumps off) →add water to cool until the thermostat reset (water volume adjustable) →pour water→circular dry burning;
3. Plug (without power): start→start plug (cycle work)
4. Plug (powered): start→add water to the kettle (adjustable water volume) →start plugging with electricity→cycle work→change the water at a fixed number of times→cycle in this way
5. Circulating boiling water: start→pouring→reset→add water (water volume can be set) →heating and boiling water→after the water is boiled (the thermostat jumps on) →automatic pouring→reset→cycle work
Applied standard
IEC60335-2-15
Applied clause
19.101
Test station
Single station
Electric control method
PLC intelligent integrated control, 7-inch man-machine touch interface operation
Drive method
Cylinder drive
Sample clamping method
Mechanical clamping with centripetal centering fixture
Basis functions
Load
Each station can display the voltage and current of sample
Conduction count
Fault alarm and shutdown when non-conduction
Test times
0-999999, when the set number of times is reached, the alarm will prompt and stop
Main configuration
The frame is made of aluminum alloy square tube; the door panel and the box are painted; the main water contact parts are made of 304 stainless steel or aluminum alloy
Air source
This machine needs to use compressed air, the air pressure is 0.5MPa -0.7MPa
Test mode
1. Boiling mode
2. Plug mode (with electricity)
3. Plug mode (without electricity)
4. Hot and cold dry burning mode (water cooling)
5. Hot and cold dry mode (self-cooling)
The main parameters of control
A: Water pouring time: 1～9999(s),adjustable; Pouring reset: 1～9999(s), adjustable
B: Adding water time: 1～9999(s), adjustable; Cooling time: 1～9999(s), adjustable
C: Plug with electricity: 1～9999 (s) adjustable; Plug without electricity: 1～9999 (s) adjustable
D: Rest setting: 1～9999 (times),adjustable; Rest time: 1～9999 (s), adjustable
E:Times setting: 1～9999 (times), adjustable; Actual count: 1～9999 (times), adjustable
Alarm
A: Count to alarm
B: No power alarm (Boil water, dry boil, plug with electricity)
C: When the equipment fails, manual operation can be adopted, and the independent operation of each station does not affect each other.
