Products
IEC 60745 Electric Hammer Durability Impact Test Equipment For Hand Held Motor
Products Description
IEC 60745 Electric Hammer Durability Impact Test Equipment For Hand Held Motor
Product Information:
This electrical hammer durability impact test equipment conforms to IEC 60745-2-1 clause 17 and IEC 60745-2-6 clause 17 and figure 103.
This apparatus is applicable to durability test for hand held motor operated
electric tools such as electric hammers, Electric drills and impact drills, which power no more than 2.5KW, to check whether electrical or mechanical hazard appears during the normal use of the electric hammer or drill.
Technical Parameters:
Control cabinet 600mm*400mm*750mm, aprox. 100kgs
Test rack 400mm*400mm*2000mm, aprox. 450kgs
Test Functions:
1. No load test: All hammers, including hammers with drill only mode, are mounted vertically in a test apparatus as shown in Figure 103 and are operated at 1.1 times rated voltage for 12h, then operated at 0.9 times rated voltage for 12h. Each cycle comprising a period of operation of 30s and a rest period of 90s during which the tool remains switched off. During test, on each test voltage, hammer placed in three different directions (horizontal, vertical, vertical), each position of the tool running time of about 4 hours.
2. Load test: All hammers, including hammers with drill only mode, are mounted vertically in a test apparatus as shown in Figure 103 and are operated at rated voltage or at the mean value of the rated voltage range, for four periods of 6h each, the interval between these periods being at least 30 min.
During these tests, hammers are operated intermittently, each cycle comprising a period of operation of 30s and a rest period of 90s during which the tool remains switched off.
During the tests, an axial force to ensure steady operation of the impact mechanism is applied to the hammer through a resilient medium.
If the temperature rise of any part of the tool exceeds the temperature rise determined during the test of 12.1, forced cooling or rest periods are applied, the rest period being excluded from the specified operating time.
No.
Item
Specifications
1
Power supply
220V/50Hz
2
Air source
5~8 bar
3
Electrical control
PLC and 7 Inch Touch screen
4
Load voltage
0-250V adjustable, current display
5
No-load rotation angle
0°,90°,180°, can manual control clockwise or counter clockwise
6
No-load rotation rate
0-360°/s, preset
7
Power on time
0-999.9s, preset
8
Power off time
0-999.9s, preset
9
Test time
0-9999h, preset
10
Total test time
0-9999h, preset
11
Interval time
0-9999min, preset
12
Load pressure
100,125,150,175,200,250,300,350,400N preset
13
Impact head
0.7,1.4,2.3,3.4kg (include the connect handle), use according to table 101
14
Steel ball
Φ38mm
15
Steel plate
100,140,180,220mm, use according to table 101
16
Rubber plate
A set of 4, Matching with steel plate and steel base
17
Steel base
base weight 90kg, equipped with 9 pcs 30kg weights
18
Equipment dimension
