Products
IEC 61180-1 Clause 7 Impulse Voltage Generator Test Equipment
Products Description
IEC 61180-1 Clause 7 Impulse Voltage Generator Test Equipment
Product Information:
The impulse voltage generator conforms to the standards as follow.
Technical Parameters:
IEC 61180-1:2016 < High-voltage test techniques for low voltage equipment - Part 1: Definitions, test and procedure requirements, test equipment> clause 7.
IEC60335-1:2016 clause 14.
IEC60950-1:2013 clause1.5.7.2, 1.5.7.3,2.10.3.9,6.2.2.1,7.4.2,7.4.3, G5, Annex N.
IEC60065:2014 clause13.3.4, Annex J.5, Annex K.
It is used to verify that appliances shall withstand the transient over-voltages to which may be subjected. The impulse voltage generator with a wave of 1.2/50ms(10/700ms) is a standard lightning wave test device. The front time of the impulse voltage is 1.2ms(10ms), the time to half-value is 50ms(700ms).
Applied standard
IEC 61180-1
Applied clause
9
Voltage integrated wave
1.2/50ms (when the output of the waveform generator is open)
Integrated wave output impedance
12W±10%, 500W±10%
Integrated wave output voltage waveform peak value
0.1~15kV
Output polarity
Positive and negative
Impulse output mode
Automatic mode
Impulse times
1~9999 times
Impulse interval time
3~99 s
Dimensions
500×470×260 mm (L*W*H)
Weight
About 30kg
Front time
T1=1.67T=1.2ms±30%
Half-peak time
T2=50ms±20%
Environment temperature
10~35℃
Relative temperature
10%~65%
Atmospheric pressure
86~106 KPa
Rated working voltage
220V±10%,50/60Hz
