Products
IEC60335-2-21 Range Hoods Heating Performance Test Equipment
Products Description
IEC60335-2-21 Range Hoods Heating Performance Test Equipment
Standards for Range Hoods Heating Performance Test Equipment:
This heating stove testing system is designed and manufactured according to the requirements of Chapter 11 and Figure 101 in IEC 60335-2-21 standards.
Structure for Range Hoods Heating Performance Test Equipment:
The test corner simulates the temperature rise environment, and is compatible with range hood testing and gas stove testing.
Technical Parameters for Range Hoods Heating Performance Test Equipment:
Pot inner diameter
φA
Bottom area
/cm2
Working power
220V, 50Hz, equipment power is about 10500W
Electric heating power
There are 6 burners, of which the input power of the rear 3 are 2KW, and the input power of the front 3 are 1.5KW (German EGO burner, with small power error and long service life).
Panel size
The left panel is about 800*1200mm, cloth 9*6=54 temperature measurement points, the rear panel is about 1200*1200mm, cloth 9*9=81 temperature measurement points, and the point layout is 100*100mm square.
Brass sheet for temperature measurement
Diameter 15mm, thickness 1mm.
Thermocouple wire
The diameter is less than 0.3mm, and the K-type OMEGA original thermocouple wire is uniformly connected to the terminal block.
Dimensions
About 1200*800*2000 (length*width*height mm)
Accessories
Equipped with 6 containers of the same size or close to the size of the stove, and additionally equipped with 20 4-meter-long thermocouple wires.
Measured heat load /kW
Size of pot /mm
heating water /kg
Bottom thickness C
Pot wall thickness D
pot depth H
corner radius E
pot quality /g
Lid quality /g
＜1.72
200
2
1.5
130
2.5
314
540
125
3
2.08
220
140
3
380
680
149
4
2.48
240
150
3.5
452
800
177
5
2.91
260
2.5
1.8
160
531
965
208
6
3.36
280
170
615
1130
290
8
3.86
300
180
707
1350
323
10
4.40
320
190
804
1520
360
12
4.95～
340
200
4
907
1800
402
14
Tolerance
±1%
±0.1
±0.1
±1%
0～0.5
±5%
±5%
