Products
Electrical Appliance Testing Equipment 120 Measure Points Test Corner
Products Description
IEC60335-1 1M 120 Temperature Measuring Points Test Corner
Equipment Overview:
IEC60335-1:2016 “Household and similar electrical appliances-Safety-Part1:General requirements” clause 11.
The test corners are mainly used to provide environmental conditions that meet the standard requirements for temperature rise testing of various electrical and electrical products.
The test corners with different distribution specifications, numbers of temperature measuring points and external dimensions can be customized according to the actual tested samples.
Test Principle:
Thermocouples used for determining the temperature rise of the surface of walls, ceiling and floor of the test corner are attached t the back of small blackened disks of copper or brass, 15mm in diameter and 1mm thick. The front of the disk is flush with the surface of the board. The thermocouples are connected to the temperature measurement instrument to monitor the temperature at each point in real time.
Technical Parameters:
WDH=1000X1000X1000mm
Other dimensions can be customized
KingPo can customize different sizes with different temperature measuring distribution according to client's specific requirements. And our test corners are well painted, the themocouples and measuring coppers are well arrayed, all the themocouples are leaded to the terminal block, which is covenient for client to connect to the temperature measuring and recording instruments.
Equipment structure
Three-panel structure, 1 base plate, 2 side plates
Dimensions
Thermocouple
American original OMEGA thermocouple, diameter <0.3mm, PTFE Teflon PFA, insulation layer temperature resistance -200℃ to 260℃, core diameter: 2X0.255mm
Thermocouple Arrangement
All lead to the terminal block
Temperature Measurement Copper
15mm diameter, 1mm thick brass sheet painted in black, the front surface of the round copper sheet is flush with the surface of the plywood
Temperature Measurement Points
40 points per each surface, total 120 temperature measuring points
Temperature Measurement Point Arrangement
100×100mm square distribution, can be customized 76×76mm or 50×50mm
Plywood
20mm thickness, matte black paint on the front and gray film on the back
Equipment features
The temperature test corner can be moved, the bottom is equipped with 2 or 3 inch flat-bottomed brake wear-resistant corner wheels, the total height is about 100mm, and the load is ≥200kg
Optional
Temperature measuring and recording instrument
