Products
Vacuum Cleaner Hoses 1000 N Deformation Testing Equipment IEC 60312
Products Description
IEC60312-1 Figure 29 Vacuum Cleaner Hoses and Connecting Tubes Deformation Testing Device
Product Overview:
This deformation testing device meets the requirements of IEC 60312-1 clause 7.3.11,figure 29. It is used to determine the permanent deformation of the hose and connecting tubes of the vacuum cleaners after being squeezed.
Equipment Features:
1. Using LCD digital display controller, all parameter settings are processed in the form of dialog box, easy to operate.
2. Display real-time force value, peak value, speed, test times.
13. High performance motor, low noise, small vibration and long service life.
Technical Parameters:
Test procedures (extracted from IEC 60312-1 clause 7.3.11):
The deivce, as shown in Figure 29, cosists of a screw press with the support covered by a piece of test carper, in accordance with 7.2.1.3.2. The force of the screw press is transmitted by a spring to a test plate of polished steel on a cylindrical bearing, the axis of which is perpendicular to that of the test pbject.
The force applied is indicated on a load indicator and yje reduced cross-sectional dimension is measured by a vernier or digital calliper.
3. Humanized design, simple operation.
4. Printout: Built-in micro thermal printer.
5. Unit of strength: N, kN, kgf, gf, lbf are selectable.
6. Displacement unit: mm, cm, in are selectable
7. Switchable unit: Pa, kPa, Mpa, kgf / cm2, lbf / in2 are selectable.
8. Protective measures: over-stroke protection, over-strength protection, over-time protection, external limit protection and many other protection methods.
9. High sensitivity, instantaneous determination of crushing and automatic shutdown
10. English visual display
11. Test, rise, fall, return speed can be set by any input, and it can be controlled accurately.
12. The test returns automatically and quickly after the test is completed, avoiding long waiting and speeding up the test efficiency.
14. High-quality S-type alloy steel sensor, high precision, strong resistance to external force and overload.
15. The outer box of the machine is made of A3 steel plate, electrostatic powder spraying and plastic coating.
Input Power
Match client's local power supply requirements
Force applied method
Electrical
Force applied range
10-1000N
Force accuracy
±0.5%
Test speed
50-250mm/min
Test stroke
0-600mm
Test plate
80×80mm
Force hold time
0-99.9s
