UL 60335 -2 3.5-4.5 Years Age Test Probe With Center Rotate Pin To Simulate Fingers

MOQ:1
Price:Customized
StandardPackaging:Exportpackage
DeliveryPeriod:20days
PaymentMethod:L/C,T/T,WesternUnion,MoneyGram
SupplyCapacity:100SetsPerMonth

Products Description

Place of Origin:China

Brand Name:KingPo

Certification:Calibration Certificate (Cost Additional)

Model Number:KP2210-49

Applied Standard:UL 60335 And UL 1017

Applied Figure:UL 60335-2-24 Figure 101.DVA.1

Middle Finger Length:95 Percentile

Hand Length:95 Percentile

Elbow To Wrist Length:95 Percentile

Wrist Diameter:5 Percentile

Forearm Diameter:5 Percentile

Minimum Hand CLEARANCE:5 Percentile

Minimum Order Quantity:1

Price:Customized

Packaging Details:Export package

Delivery Time:20 days

Payment Terms:L/C, T/T, Western Union, MoneyGram

Supply Ability:100 Sets Per Month

Highlight:UL 60335 -2 Test Probe, Center Rotate Pin Test Probe


Product Description

 

UL 60335 -2 3.5-4.5 Years Age Test Probe With Center Rotate Pin To Simulate Fingers

 

Product Overview:

 

This UL 60335-2-24 Figure 101.DVA.1 Articulated Probe 3.5-4.5 Years Age SN2210-49 is designed and manufactured meet the requirements of the standard of UL60335-2-24 Figure 101.DVA.1.

It is used to verify that the moving parts of products for refrigeration or similar use may not be touched by children and the moving parts of which may cause personal injury.

 

Technical Parameters:

 

Item Dimension Description

Dimension

mm

A Middle finger length, 95 percentile 55
B Middle finger diameter, 5 percentile 9.1
C Hand Length, 95 percentile 125
D Elbow to wrist length, 95 percentile 165
E Wrist diameter (circumference divided by pi), 5 percentile 32
F Forearm diameter (circumference divided by pi), 5 percentile 46
G Minimum hand CLEARANCE (cone shaped hand part) , 5 percentile 39.1
H Cone shaped part at finger attachment 20
I Hand breadth (flat hand part), 5 percentile 48
J Wrist breadth (used for the hand thickness-flat hand part) , 5 percentile 24
K Hand breadth at finger attachment (flat hand part) 36
L Upper arm length, 95 percentile a

Notes:

1-The probes were designed with a center pin to rotate the hand with respect to the lower arm. That motion can be equivalently represented by rotating the probe.

2-The finger “tip” is developed to match the dimensions of the UL articulated probe. The diameter from the tip to the first joint them tapers from the tip dimensions to the finger diameter. The joints are spaced equally along the finger length.

3- The probe is designed to permit the hand to “bend” with respect to the arm using a hinge pin located 6mm (0.24 in) from the hand length (wrist end) and the hand is restricted in bending not more than 90° with respect to the arm.

a If the upper arm is required to evaluate a part it shall consist of a flexible tube attached at the end of the lower arm, as the exact position of the elbow cannot be readily determined from the data points chosen.

 
 

Test procedures :

 

Shown as following photo, using the test arm to simulate a human hand touching the vacuum cleaner housing to determine whether the test probe can touch vacuum cleaner's internal parts through the housing.

 

 

 

Tags:

Related Products