BS EN 12983-1 Cookware Handle Pull Resistance Test Apparatus

Product information:

It is used for testing resistance to pull on cookware handles. When the handle is subjected to horizontal pull, the degree of deformation cannot affect the function of the handle. After the test, the fasteners are not loosened. It is used to evaluate the pull resistance capacity of the cookware handle.

Applied standard:

The design of the handle torque resistance test apparatus of cookware complies with BS EN 12983-1:2020 clause 7.11 and Appendix M.

Technical Parameters:

1. The mass of steel impact hammer: 1kg±50g

2. The mass of metal guide and stop: 10kg±50g

3. The drop height: 150±5mm

4. The handle axis of the cookware can be adjusted to be 0°±1 °from horizontal by adjusting the mounting brackets

5. Dimensions: length * width * height: 700mm*500mm*900m

6. Install the cookware, adjust its handle to be horizontal, clamp the handle, apply the weight of the guide and the stop to the soft rope, raise the impact weight to the upper limit (150mm), and release it to the stop. Complete the pull test.