Products
IEC 62133-2 Battery Temperature Controlled Type Internal Short Circuit Tester
Products Description
IEC 62133-2 Battery Temperature Controlled Type Internal Short Circuit Tester
Product information:
It conforms to IEC 62133-2: 2017 clause 7.3.9, JISC8714:2007 5.5, and etc.
Temperature Chamber Technical Parameters:
External Chamber
Dimension
External Chamber
Material
The thermal isolation layer up to100mm, which employs fire-resistance high density PU foam material and the
thermal isolation coefficient less than0.0212kcal/m∙hr.
Single Door mountedwith3 layer vacuum glass viewing window with water-proof function (size: W430mm x H
580mm), the door framed signed with electrical heating function (automatic adjustment) to proof frost, dew,
thus, provide the user a clear vision to observe entire testing process;
On the left side of test chamber, attesting hole withitsdiameter50mm is opened with silicone rubber plug and
Stainless steel cap/2pcs;
Imported silicone glue is applied for door frame and test chamber sealing to provide a reliable sealing
performance;
1.AirCoolingMethod: Fully Enclosed single-stage compressor
2.Compressor: France Tecumseh Compressor1 set
3.Coolant: fluoride-free environmental coolant (USA DuPont) HFCR404A
4.Condenser: Air-cold highly efficient forced exchange fin type
5.Vaporizer: highly efficient multi-stage vaporizer with Hydrophilic membrane fin (thicker fin type)
6.Oil Separator: EMERSON
7.Vaporizer Pressure Regulator: Danfoss vaporizer pressure regulator (available to work in low temperature and
High humidity condition without no frosting)
8.Solenoidvalve: Japan saginomiya or Danfoss;
1.Heater: Naked-nichrome alloy electrical heater
2. Control Method: signal output from controller through the SSR to gain a high precise non-contact switching
control
1.Control Method: Programmable high accurate micro-computer controller: chilled-mirror dew-point hygrometer
To control temperature and humidity system. Anti-windup PID, BTC control method (thermal compensation
function) +DDC intelligent cool flow control+ DEC intelligent electrical control (temperature test alternative
testing program setting)
2.TEMI 880 color touchscreen controller to display temperature and humidity with EN menu. And 3.1’’LCD
controller is compatible with computer control.
Internal Short Circuit Chamber Main Technical Parameters:
Curve & Digraph
Diversification
1.Designedwith Auto Scale function, diagraph can be displayed as optimal size and available for dynamic shift;
2.Curve Display: Load-displacement, load-time, displacement-time, stress-strain, load- 2 point extending diagraph as well as curve comparison;
Measurement &Display, Record and output function:
Machine Standard Configuration:
Temperature Range
-20℃ ～ +100℃(Controllable)
Resolution
0.01℃
Temperature Fluctuation
0.5℃
Temperature Uniformity
2.0℃
Max. Low Temperature
-5℃
Temperature Rising Rate
Ave.3℃/min(0℃ to100℃,Nonlinear No-load)
Temperature Cooling Rate
Ave.1℃/min(100℃to0℃,Nonlinear No-load)
Inner Chamber Dimension
W600 X H750 X D500MM
Inner Chamber Material
Mirror stainless steel with bottom reinforcement
W1500mm*D1000mm*H1750mm
Cold-Rolled Steel with paint-baking treatment (gray-white color)
Insulation Layer
Chamber Door
Single Door, Overall Size: 500×750mm
Observation Window
Testing Hole
Sealing
Internal Lighting
Viewing window with 9WPhilipis LED lamp with energy-saving and moisture and explosion proof function
Refrigeration System
Heating System
Control System
Max. Loading
200KG
Resolution
1/10000
Force Accuracy
≤0.5％
Force Magnification
7-stageautomatic shift
Displacement Resolution
1/1000
Displacement Accuracy
≤0.5％
Speed Range
0.01－20MM/S
Effective Range
0~ 150mm
Max. Testing Plane
300X300MM (Available to custom design to meet special test)
Voltage Acquisition Range
0~20V
Voltage Resolution
1mV
Voltage Acquisition Frequency
100Hz
Power Source
220V,60HZ
Standard Test Modular Function
Provide users with test ranges and requirement from GB, ASTM, DIN, JIS, BS etc.
Test Specimens Data
Provide all test data for all test specimens: once put, long available and available to modify equation to Improve test data and performance
Double Reporting Sheet
Fully Open Reporting Sheet in various format for selection (Test program can create EXCEL format)
Unit Shift
Length units (mm, cm, inch), force units (T, Kg, N, KN, g, lb.) can be displayed digitally and dynamic shift available;
Test Result
Available to output in EXCEL format;
Test End
Automatic/manual storage of test data, automatic calculation of the max. force, upper/lower yield, loop approach, progressive approach. Non-proportional extension, tensile strength, compression strength, arbitrary elongation strength, constant load elongation strength, elastic modulus, elongation percentage, stripping area maximum value, minimum value, mean value, net energy, flextural modulus, Breaking Point x% loading, Breaking load x% displacement, etc.
Language Shift
Chinese/English
Demo Function
Designed with historical test data demo function
Control Software Main interface
