Products
UN38.3 IEC62133 Battery Cell 13kN Crushing Acupuncture Computer Control Testing Equipment
Products Description
UN38.3 IEC62133 Battery Cell 13kN Crushing Acupuncture Computer Control Testing Equipment
Overview:
This Battery Crush Acupuncture Test Machine is designed to simulate actual using environments for the lithium battery such as battery in crush and feedback the various results in different crushing conditions.
Capacitor is placed between two crushing boards, the motor drives the screw to transmit the crushing force onto battery. The screw returns if a pre-set force value reached, or voltage dropped to a pre-set value, or the battery deformed then repeat a cycle between periodic crushing and return.
Standards Compliant:
It is conforming to UN38.3 clause .4.6.3, IEC62133:2017 clause 7.3.6, IEC62133:2012 clause 7.3.6, 8.3.5, IEC60086-4 clause 6.5.3 IEC 60086-1 and etc.
Technical Parameters:
Φ3X100MM: 10 pieces
Φ4X100MM: 10 pieces
Φ6X100MM: 10 pieces
Φ6X100MM: 10 pieces
Standard Configuration:
Diameter 150MM flat crush disk 1 set
Force Range
1~20kN (2 ton, available manual control with Max. output force, force range, includes a 13kN output force)
Tester Architecture
Free Stand & Vertical extrusion
Power Input
220V 50 Hz or 110V 60Hz (can be customized)
Force Deviation
≤±1% Full-scale Range
Unit Shift
Kgf, lbf, n, kn, kpa, m pa
Crushing Velocity
1~ 900mm/min(controllable)
Crushing Velocity Accuracy
≤±1% Full-scale Range
Crushing Travel
300mm
Crushing Motion Accuracy
≤±1% Full-scale Range
Available Battery Size
W400mm X D400mm X H300mm
Voltage-Reducing Controlling Method
The pressing plate returns or returns after crushing force continues for a fixed time if voltage drop into a fixed value.
Crushing Force Controlling Method
The pressing plate returns or return after crushing force continues within pre-set time if pressing force reach set value.
Displacement Control
After paused in a period if the pressing tray down to predesigned position, pressing tray will continue second displacement and pause, by repeating such a working mode till to final displacement and pressing tray return after a period maintaining
Emergency Button
This crushing tester designed with Emergency stop function
Voltage Resolution
1mv
Test Terms
Force, Displacement (Deformation), Voltage, one from three projects or all three projects
Crushing Time Maintaining
0~99 Hours 99 Minutes & 99 seconds, time can be controllable to control the deformation and stop if test fulfilled
Industrial Communication
Computer Control, ensure stability and real-time of remote sampling, with explosion-proof function, all data can be store and print through computer with Excel format.
Driving Method
Servo Motor Driving
Nail Penetration Speed
1 ~ 40mm/s(Controllable)
Tungsten steel needle
1
Computer Cabinet & Controller One E.A
2
Computer( Better than the below configuration: 19inch LCD Display,(TM) 2 dual core
processor, 2GB DDR2,320GB)1Set
3
High resolution camera 1 set
4
5
Force Sensor System one set
6
Voltage sampling system 1 E.A
7
Fire-extinguishing system 1E.A.
8
CD (control software) and operation manual 1 copy
9
Steel needle clamp 1 E.A
