Products
IEC60669 Clause 12.3.12 Figure 10 Voltage Drop Tester For Plugs And Socket
Products Description
IEC60669 Clause 12.3.12 and Figure 10 Voltage Drop Tester for Plugs and Socket
Product Information:
The Voltage Drop Tester is designed and manufactured according to the standard requirements of IEC60669-1: 2017 clause 12.3.12 and figure 10, IEC60884-1: clause 12.3.12 and figure 12 and etc.
It is used to check screwless terminals shall be so designed that the connected rigid solid conductor remains clamped, even when it has been deflected during normal installation, for example, during mounting in a box, and the deflecting stress is transferred to the clamping unit.
Technical Parameters:
Applied Standard
IEC60669-1
Clause
12.3.12 and figure 10
Test Station
Single
Deflection Angle
0-360°
Bending Direction
Towards any one of the 30°±3° difference, a total of 12 directions
Bending Force
0.25 N, 0.5 N, 1.0N
Direction of Application
Perpendicular to the direction of the unbending wire
Operation Method
Manual
Judgement Criterion
Voltage-drop not greater than 25 mV or greater than 1 min
