Products
IEC 60884-1 Apparatus For Checking Damage To Conductors 10±2 Rpm
Products Description
IEC 60884-1 UL 498 Apparatus for Checking Damage to Conductors
Equipment overview:
Compliant with standards: IEC60884-1: 2013 clasue 12.2.5 and 12.3.10 Figure 11 and Table 9, UL 498. etc.
Technical Characteristics:
0.3,0.4,0.7,0.9,1.4,2.0,2.9,4.5,6.8,8.6,9.5,10.4,14,15,16.8,20,22.7kg
Note: According to Table 5, configure weights for 1-300mm² wires, for required load above 8.6kg should be combined
6.5,9.5,13,14.5,15.9,19.1,22.2,25.4,28.6mm
Note: Configure bushings for 0.2-300mm² wires according to GB14048.1 Table 5
Weight distribution table:
It is used to examine that terminals with screw clamping shall be so designed and constructed that they clamp the conductor(s) without undue damage to the conductor(s).
Control and operation method
Electric control, key operation
Test station
Single
Sample fixture
Universal
Test speed
10±2 rpm, adjustable, compatible with 9 rpm required by UL standard
Rotation diameter
75mm and 76mm two holes, compatible with UL standards
Test time
0～999.9min, can be preset, the default is 15min required by the standard
Weights
Height distance
250~500mm
Bushing diameter
Height adjustment method
Handwheel adjustment lifting mechanism
Dimensions of the equipment
1000×500×1300 (mm) W×D×H, the weight of the equipment: depends on the weights configuration
Weight with hook
One piece of each 0.3kg, 0.4 kg, 0.7 kg, 0.9 kg, 1.4 kg, 2 kg, 4.5 kg, 2.9 kg, 6.8 kg, 8.6 kg
Weight with through hole
0.7kg*2pcs, 0.9kg*3pcs, 2.3kg*1pc, 3.2kg*2pcs, 4.5kg*1pc, 4.6kg11pc
2.9kg
2kg+0.9 kg
6.8kg
4.5 kg +2.3 kg
9.5kg
8.6 kg +0.9 kg
10.4kg
8.6 kg +0. kg 9x2pcs
14kg
8.6 kg +4.5 kg +0.9 kg
15kg
8.6 kg +3.2 kg x2pcs
16.8kg
8.6 kg +4.5 kg +2.3 kg +0.7 kg x2pcs
20kg
8.6 kg +4.6 kg +4.5 kg +2.3 kg
22.7kg
8.6 kg +4.5 kg +4.6 kg +2.3 kg +0.9 kg x3pcs
