Products
IEC 60695-10-2 Fig 1 Ball Pressure Loading Device With 1000°C Thermocouple
Products Description
IEC 60695-10-2 Fig 1 Ball Pressure Loading Device
Product Overview:
The Ball Pressure Tester is designed and manufactured according to IEC60695-10-2 Edition 3 2014-2 fig 1. It is parts of non-metallic materials for resistance to heat. It is applicable to electrotechnical equipment, its subassemblies and components, and to solid electrical insulating materials except ceramics.
The Ball Pressure Tester kit will include a pair of insulated gloves (resistant up to 400°C) and a stand for the pressure device. A type K thermocouple (0~1000°C) can be inserted in the test specimen support.
Technical Parameters:
Finished steel ball for rolling bearings in accordance with ISO 3290-1
The tester comes with interchangeable components to allow the user to select their testing preference to Figure 1a or Figure 1b of IEC 60695-10-2. In either configuration, the total force of the loading device is 20N ±0.2N. In the case of using the 5mm ball, the mass of the ball is included in the total force.
Load
20N±0.2N
Steel ball material
Steel ball size
Ф5mm±0.05mm / R2.5mm
Other parts material
304 stainless steel
Test specimen support
Ф50X100 with Ф2.5 thermometer hole
Thermocouple
Type K, 0~1000°C
Insulated gloves
Resistant up to 400°C
Standards
IEC60695-10-2 Edition 3 2014-2 fig 1, IEC60335, IEC60695 etc.
