Products
IEC 60065 230° Rotating Angle Corrosion-resistance Metal Mandrel Test Apparatus
Products Description
IEC 60065 Corrosion-Resistance Metal 230° Rotating Angle Mandrel Test Apparatus
Product Overview:
This test apparatus conforms to IEC60065:2014 clause 8.21, figure 14~16, IEC60558-1 Fig6, IEC 60950 and etc. It is used for tensile and electrical strength verification for non-separable thin layer materials.
This test apparatus has the mechanical limits in the position of 0o and 230o to make sure the accuracy of the testing angle.
Technical Parameters:
How to rotate the mandrel to 230° position:
Pull out the position locking pin, then the mandrel is rotated from 0°limit position to 230°limit position, then the position locking pin is locked. Please refer to following picture.
Mandrel Material
Made of corrosion-resistance metal
Bracket Material
Aluminum profile
Weights
1N*2,50N*2 (with through hole), 50N*1 (including the weight of hanging hook and clamping device for specimen)
Force of the two terminals of material foil
1N (two sets of 1N weights, also the clamping device for metal foil)
Rotating angle of the mandrel
230 o
Height of the mandrel to the bottom of the device
500mm
