Products
Hand - Held Spray Nozzle Protection Against Spraying And Splashing Water IPX3 IPX4
Products Description
IPX3 IPX4 Hand-held Spray Nozzle for Protection Against Spraying and Splashing Water
Overview:
The spray nozzle is used to verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under water spraying and splashing at degree IPX3 and IPX4.
Standards compliant:
Structure:
This device is manufactured according IEC 60529 figure 5, it can achieve IPX3 / IPX4 hand-held spraying test by connecting water pipe.
It eEnsure that the water spraying and splashing speed reaches the standard required value by controlling the water supply flow, make the enclosure of the specimen to be splashed in all directions.
Technical parameters:
Normally we suggest to adopt the automatic control for IPX3/4 testing, if client has limit budget, the following easy installation for IPX3 and IPX4 testing is for reference:
Parameters of Spray Nozzle
Outer diameter: Ф102mm, spherical diameter: SФ75.5mm, 1 hole at the center, 2 inner circles of 12 holes at 30° pitch,4 outer circles of 24 holes at 15° pitch , total 121 holes of Ф0.5mm, made of brass.
Water Flow
10L/min±5%, flow meter is adjustable
Pressure
50～150Kpa, the pressure gauge measuring range: 0～0.25Mpa
Moving Shield
Made of aluminum, can be detachable
Optional
18L/min rotameter: 1 piece, water pipe: 3 M, Hoop: 4 piece
