Products
IEC 60598-1 Draught Proof For Lamps Product Temperature Measurement Windproof Chamber
Products Description
IEC 60598-1 Draught Proof For Lamps Product Temperature Measurement Windproof Chamber
Product overview:
This windproof chamber is designed according to standard IEC 60598-1:2017 Clause 12.4.1 and Annex D and etc. Applied to provide standard environment condition for lamps product temperature measurement.
The bottom surface is solid wood panels, the other sides are double-layer metal mesh plates, mesh plates spacing is 150mm, ventilation rate of about 40%; all the plates are black matt painted.
Technical parameters:
Windshield installation requirements:
External requirements:
Internal sample installation requirements:
Outer size
1300 x 1300 x 1168 mm (L x D x H)
Inner size
1000 x 1000 x 1000mm (L x D x H)
Metal mesh plates space
150mm
Door structure
Single, double layer (outward open), 900mm x 1900mm (W*H)
Aperture of screen
ф2mm
Ventilation rate
Approx. 40.5%
Surface coating
black matt paint
Floor plate size
2100mm x 2100mm x 18mm (L x D x Thickness)
Temperature sensing copper sheet + 3 meters thermocouple wire
25 NOS
There is at least 300mm clearance around the top and sides of the draft shield.
The location of the windshield should be as far away as possible from the air flow and prevent sudden changes in air temperature and radiant heat of the light source.
Ambient temperature: about 25 ℃.
The gap between the inner surface of the draft shield and any part of the lamp should be at least 200mm.
When multiple lamps are tested at the same time, attention should be paid to use light barriers to prevent the radiant heat between lamps from affecting each other.
Different lamps are tested in the same state as they are in actual use as far as possible. This equipment has provided a variety of baffles that can be combined to facilitate various combinations.
