Products
IEC60529 IPX3~6 Comprehensive Waterproof Testing Equipment With PLC + Touch Screen
Products Description
IEC60529 IPX3~6 Comprehensive Waterproof Testing Equipment With PLC+Touch Screen
Overview:
Application Background: Damage to products and materials caused by natural water (rain, sea water, river water, etc.) results in incalculable economic losses every year. The damage caused mainly includes corrosion, discolouration, deformation, loss of strength, swelling, mould, etc. Electrical products in particular are susceptible to fire due to short circuits caused by rainwater. Therefore, water testing of enclosure protection for specific products or materials is an essential and critical process.
General application areas: outdoor lighting, household appliances, automotive parts and other electrical and electronic products.
Equipment Function: The main function of the equipment is to test the physical properties and other related properties of electrical and electronic products, lamps, electric cabinets, electrical components, automobiles, motorbikes and their parts under simulated climatic conditions. At the end of the test, through the verification to determine whether the product performance meets the requirements, to facilitate product design, improvement, verification and factory inspection.
Standard: IEC60529:1989 +A1:1999 +A2:2013 <Protection class provided by the enclosure (IP code) > IPX4 and IPX5 tests, Fig. 5 and Fig. 6.
Technical parameters:
Technical Parameters
The floor is level, with smooth drainage, and the floor and walls are waterproofed,
The load-bearing capacity of the floor is not less than 200kg/square metre.
Good ventilation
No strong vibration around the equipment
No strong electromagnetic field around the equipment
No flammable, explosive, corrosive substances and dust around the equipment.
Appropriate space for use and maintenance around the equipment:
Rear side, left and right side, top of the equipment: 800 mm; Front side of the equipment: 1400 mm: 1400 mm.
Temperature:5℃～35℃
Relative humidity: ≤85%
Air pressure:86kPa～106kPa
Voltage, Frequency
Power
Protective Grounding Resistance
Power Switch
1. The user must configure the equipment with the appropriate capacity leakage protection air switch at the installation site, and the switch must be used independently for the equipment.
2. The use of knife switches or power sockets is strictly prohibited. 3.
3. The leakage protection air switch should not be more than 2 metres away from the equipment.
Water Source
1. Require the user to configure a water source for the equipment at the installation site, with a water pressure of not less than 0.2Mpa, and install a 4-point tap. 2.
2. The tap position is not more than 2 metres away from the equipment.
Equipment Features:
1. Suitable for products IPX4 and IPX5 (actually can reach IPX3, IPX4, IPX5, IPX6) waterproof level test. 2.
2. The shell is made of domestic high-quality steel plate, surface spraying baking paint, beautiful and durable.
3. The inner liner and turntable are made of SUS304# stainless steel plate, to ensure that the long-term use of rust.
4.The door is equipped with a transparent observation window (tempered glass material), the chamber is equipped with LED lighting, easy for the operator to observe the internal test situation.
5. IPX34: Configuration of spray nozzle according to IEC60529 Fig. 5 (as shown below)
6. IPX56: Configured a spray nozzle according to the specifications of IEC60529 figure 6 (as shown below):
7. Rotary disc drive: using high-quality stepping motor, can automatically control the forward and reverse rotation (forward and reverse: suitable for sample power-on test and prevent cable entanglement).
8. Test time can be set on the touch screen. The setting range is 0-999min (adjustable). 9.
9. the core control system adopts 7-inch touch screen + PLC. electrical components using Omron and other imported brands. The wiring process meets the requirements of national standards. Reasonable layout of the electrical board, solid wiring, clear marking.
Basic Parameters
Inner Chamber Size
L1000*W1000*H1000mm
Outer Chamber Size
L1480*W3800*H1800mm
Turntable Diameter
￠400mm
Turntable Maximum Load Bearing
30KG
Turntable Speed
1 -5r/min (adjustable)
Turntable Rotation Method
Always positive / positive and negative alternate
Flow Adjustment Method
Manually adjust flow with adjustable panel flow meter
Test Time
0-999 min
Total Wright
350kg
IPX34 Spray Nozzle Parameters
Parameters of Spray Nozzle
Outer diameter: Ф102mm, spherical diameter: SФ75.5mm, 1 hole in the centre, 2 inner ring 12 holes, spacing 30 °, 4 outer ring 24 holes, spacing 15 °, a total of 121 Ф0.5mm holes, brass material.
Water Flow
10L/min±5%, flow meter is adjustable through rotameter, electronic flowmeter is optional
Pressure
50～150Kpa, the pressure gauge measuring range: 0～0.25Mpa
Moving Shield
Made of aluminum, can be detachable
Spray Distance
2.5M (nozzle away from the center of the turntable)
Nozzle Fixed Method
Mechanical fixing
IPX56 Jet Nozzle Parameters
IPX5 Nozzle Jet Aperture
6.3mm
IPX6 Nozzle Jet Aperture
12.5mm
IPX5Jet Flow
12.5±0.625
IPX6 Jet Flow
100±5L/min
Water Pressure (Mpa)
Adjusted according to the specified water flow
Jet Distance
2.5M (nozzle away from the center of the turntable)
Nozzle Fixed Method
Mechanical fixing
Electrical Parameters
Power Supply for Equipment
380V, 50Hz
Equipment Power
3.0KW
Safety Protection Function
Leakage protection, water shortage protection, short circuit protection
Conditions of Use
The following conditions are guaranteed by the user and the corresponding connection is completed.
Use of Space
Environmental Conditions
AC380V±10%; 50Hz±10%; three-phase four-wire + protective ground wire
3.0kW
Grounding resistance of protective grounding wire is less than 4Ω
