Products
IEC 60529 IPX8 Water Ingress Testing Equipment Continuous Immersion Stainless Steel Tank
Products Description
IEC 60529 IPX8 Continuous Immersion Water Ingress Test Equipment
Product introduction For IPX8 Continuous Immersion Water Ingress Testing Equipment:
The high pressure water tank is used to verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under continuous immersion in water at degree IPX8 as per IEC 60529:2013.
The water tank is made of stainless steel, the equipment is controlled by PLC, test parameters can be set on the touch screen directly, water supply and pressure are achieved automatically.
This complete set of equipment consists of a comprehensive control cabinet, IPX8 pressure vessel, and a stainless steel stair. The intelligent water supply and control system consists of a water supply tank, a water supply system, and a control system. The test water supply flow is controlled by PLC, frequency converter, and sensors.
Technical Parameters For IPX8 Continuous Immersion Water Ingress Testing Equipment:
Working environment For IPX8 Continuous Immersion Water Ingress Testing Equipment:
Temperature:5℃～35℃
Relative humidity:≤85%
Air pressure:86kPa～106kPa
Item
Specifications
Equipment power supply
AC380V 50HZ 35KW.
Sample placement
Use electric hoist gantry hanger to lift, carrying 50KG.
Opening the cover
The screw rod is lifted and moved laterally, and it can be fully opened, which is convenient for placing samples.
Double pressure protection
(1) mechanical protection: spring-type safety relief valve; (2) program control: the pressure exceeds the upper limit value of the water pump to stop working and immediately release the pressure.
Safety valve protects ultimate pressure
0.55 MPa.
Test time
0-99H99M99S can be set.
The principle of pressurization method
Ｗater pressure pressurization, PLC program control, the current value of pressure is collected from time to time through PLC, the frequency converter controls the pump speed and frequency to pressurize, and the pressure is constant.
Water temperature control
5～30℃ can be controlled, the heating adopts stainless steel heating tube, and the cooling adopts 10HP chiller.
Allowable samples with max. dimensions
500 X 500 X 500 mm
Pressurized container
SUS304 stainless steel tank, the diameter of the tank body is 800mm, and the height of the tank body is 1000mm.
Stair
Stainless steel stair
Use site
The ground is flat, the drainage is smooth, the floor and wall are waterproofed, and a floor drain or drainage ditch is installed
Ground load capacity is not less than 300kg / m2
Field is well ventilated
No strong vibration around the equipment
No flammable, explosive, corrosive substances and dust around the equipment
Appropriate use and maintenance space is left around the equipment:
Back, left, right, top of the device: 600mm; front of the device: 1000mm
Environment conditions
Power supply
AC 380V, 50Hz, must have nature wire
Water supply
Tap water / pure water
Gas source
User should prepare the air compressor, the recommended output air pressure: 0.6Mpa—0.8Mpa.
