Products
Electric Car Accessories Mechanical Strength 1～6J Energy Pendulum Impact test Apparatus
Products Description
Electric Car Accessories Mechanical Strength 1～6J Energy Pendulum Impact test Apparatus
Standards & Clauses:
IEC60309-1: 2012 “Plug, socket-outlets and couplers for industrial purposes–Part1: General requirements” clause 24.2, figure 7
Samples and Restrictions:
Electric vehicle charging interfaces (plug, socket-outlets, vehicle connectors), industrial purpose plugs, socket-outlets and couplers.
Application:
To verify the mechanical strength of the vehicle plugs, socket-outlets and couplers accessories.
Test Principle:
The equivalent mass striking element is free released at a certain height, after the conversion of gravitational potential energy to kinetic energy, to achieve the required impact energy.
Structure:
The mounting bracket can be adjusted from front to back and left to right, and the impact angle is adjustable.
Dimensions & Weight:
Dimensions: about W500*D500*H1500mm
Weight: about 60kgs
Technical Parameters:
0.5Kg (low energy) (2 pieces of 0.25Kg weights),
1Kg (high energy) (4 pieces of 0.25Kg weights)
Operation Method
Manual operation
Impact Weight
50*16mm; 304# stainless steel 0.25Kg impact weights
Combined Impact Weight
Impact Energy
1～6J(The impact hammers can be interchangeable)
Hammer Anvil
Ф50
Impact Angle
25°, 35°, 36°, 42°, 47°, 52°
Pendulum Support Structure
Can move back and forth, left and right and can rotate 90°
Pendulum Material
Steel pipe with outer diameter of 10 mm and wall thickness of 1.0 mm
Pendulum Length
1m, from the pivot to the center of the impact element
Mounting Plate
8mm thick stainless-steel plate, made according to the customer's specified aperture and position, default one set
Impact Height
776mm, 833mm
Vertical Board
Plywood
X/Y/Z Axis Stroke
Movable range is greater than 300 mm
