Products
IEC 62368-1 Annex S.3 Hot Flaming Oil Test Device Flammability Test 1mL/Min
Products Description
IEC 62368-1 Annex S.3 Hot Flaming Oil Test Device Flammability Test 1mL/Min
Product information:
The Hot Flaming Oil Test Device is designed and manufactured according to the standard requirements of IEC 62368-1: 2018 Annex S.3, IEC60950-1:2005 and IEC60950-1:2013 clause 4.6.2, Annex A.3 and etc. It is used to simulate that the flammable liquids used in electrical and electronic equipment may ignite due to overheating and leak out of the fire protection enclosure, causing electrical fires and endangering the reliable operation of the equipment and personal safety.
The test process are to fill 10mL of flammable liquid with the specified performance (average calorific value 38MJ/L, mass per unit volume between: 0.845g/mL～0.865g/mL, flash point: 43.5℃~93.5℃) in the metal ladle, after heating to the distillate fuel oil’s ignition point and burning 1mim, the motor drives the spoon to rotate at a certain height (100mm) and a certain flow rate (1mL/s), and then steadily pour the flammable liquid on the center of the opening of the sample (fire protection enclosure). The fire protection performance of the test product is evaluated by whether the ignition bedding at the specified distance (50mm) and with the specified density (40g/m2) under the test product is ignited.
Technical parameters:
Applied standard
IEC 62368-1
Applied clause
Annex S.3
Control method
Integrated PLC & touch screen
Supply voltage
Match client’s local power supply requirements
The oil of test
Average calorific value 38MJ/L, mass per unit volume between: 0.845g/mL～0.865g/mL, flash point: 43.5℃~93.5℃
Volume of ladle
>10mL
Hot flaming oil burning time
1 min (1s~999999s can be preset)
Hot flaming oil pouring speed
1 ml/s
Hot flaming oil pouring height
100mm
Hot flaming oil pouring time
10s (1s~999999s can be preset)
Ignition bedding material
Bleached CHEESECLOTH of approximately 40 g/m2
Distance between ignition bedding material and sample
Ignition bedding material is under the sample about 50mm
Test area background color
Black
Equipment size & weight
1130mm* 600mm* 1400mm, with a vent port of ф100mm, 147KGS
