Products
Axial Force Of Edson Caps Test Equipment IEC 62560 Luminaries Test Equipment
Products Description
Axial Force Of Edson Caps Test Equipment IEC 62560 Luminaries Test Equipment
Product information:
The test equipment is designed and manufactured according to IEC 62560 clause 9.4. It is used for checking the axial strength of the Edison cap.
Technical parameters:
Use a motor-driven pressure plate to apply a certain pressure to the center of the lamp cap, so that the test lamp cap exerts force vertically along the axis of the fluorescent lamp until the force reaches a constant value for 1 minute and then released.
Mechanical clamping, the clamping point position is adjustable
7006-6-1,7006-27H-1,7006-27F-1,7006-27B-1,7006-27-7, each one piece
Accordingly following table:
Samples and restrictions
Edison lamp cap
Test purpose
Used to detect the mechanical strength of caps of Edsion lamps.
Test principle
Structure and features
Single-arm force applying mechanism, force value can be set, LCD screen operation and display
Power supply
AC220V,50Hz
Main performance indicators
Test station
Single station
Electrical control method
LCD interface operation and display, with force value curve
Drive mode
Motor driven
Specimen clamping method
Force apply range
0-500N, resolution 0.1N, accuracy 1%F.S. It can achieve achieve 80N and 120N required by IEC62560:2015.
Test gauge
force application speed
0-300mm/min
Stroke
0-500mm,resolution: 0.01mm
Result display
With force value-time curve, the test results can be output through a micro printer
