CISPR 14-1 Steel Vessels For Hotplates Test Φ110mm Φ145mm Φ180mm Φ220mm Φ300mm

Standards & Clauses:

The vessel conforms to the standard requirements of CISPR 14-1:2016, IEC 60335-2-6:2018 figure 102, IEC60335-2-9:2016 clause 3.1.9.108 figure 104, etc. One set includes Ф110 mm, Ф145 mm, Ф180 mm, Ф210 mm, Ф300mm, total 5 pcs.

The vessel simulates the cooking appliance which is placed on the induction hotplate. The vessel is made of low carbon steel having a maximum carbon content of 0.08%.

Technical Parameters:

Test procedures and operation

Please refer to the relevant standards.

Take IEC60335-2-9:2016 clause 3.1.9.108 as an example:

Induction hot plates are operated with vessels containing cooking oil. Controls are adjusted to their highest setting until the oil temperature reaches 180℃±4℃, and are them adjusted so that this temperature is maintained. The oil temperature is measured 1 cm above the centre of the bottom of the vessel. For appliances which cannot heat the oil to 180℃±4℃, the control is maintained at its highest setting.

Notice

• This test medium for these vessels should be oil according to standard requirements, please don't use water or other medium, or the coating will be damaged.
• Please do not dry burning this vessel or the surface will be damaged.
• Please do not damage the appliance shape (such as scratching, bending, etc.).
• Prevented from dust and moisture environment, in order to avoid the oxidation to affect the dimensional accuracy.