Products
IEC 60065 2014 Clause 9.1.1.3 Test Probe 19 Ф5.6mm Children Finger Probe
Products Description
IEC 60065:2014 clause 9.1.1.3 Test Probe 19 Ф5.6mm Children Finger Probe
Product Overview:
This probe conforms to the standard requirements of IEC 61032 figure 13 test probe 19, IEC 60065:2014 clause 9.1.1.3, etc. This probe is intended to simulate access to hazardous parts by children of 36 months or less.
Probe Dimension:
Please refer to the relevant standards.
Take IEC 60065:2014 clause 9.1.1.3 as an example:
The test is repeated using small finger probes according to test probes 18 and 19 of IEC 61032:1997. This does not apply if the intended conditions of use prevent the apparatus from being accessed by children.
The test probe doesn’t have built-in force, if specific applied force required, the test probe should work together with a force gauge (use a force gauge to apply required force on the end of the probe directly).
The probe is equipped with a connection cable, for verifying whether the LIVE PARTS touched, recommended to work with our anti-shock probe experiment device or a 40~50V voltage indicator. Connect the connection cable of the probe with one terminal of the anti-shock probe experiment device, and then use an additional cable to wire the LIVE PART of specimen with the other terminal of the anti-shock probe experiment device. Showing as following reference picture:
Details
Hemispherical radius (mm)
R2.8±0.05
Finger probe diameter (mm)
Ф5.6±0.1
Finger probe length (mm)
44±0.15
Axes of joints distance (mm)
14.67
Collar diameter (mm)
Ф25.9±0.3
Collar length (mm)
101.6±0.3
Extension handle diameter (mm)
Ф25.4±0.3
Extension handle length (mm)
464.3±0.8
Finger probe material (mm)
Stainless steel
Collar and handle material (mm)
Nylon
