Products
IEC 60335-2-21 2.5Mpa Hydrostatic Pressure Test System Computer Operation
Products Description
IEC 60335-2-21 2.5Mpa Hydrostatic Pressure Test System for Water Heaters
Product overview:
This hydraulic pressure test apparatus is required by IEC 60335-2-5 cl.22.101,IEC 60335-2-7 cl.22.101 , IEC 60335-2-21/35 22.47 & 22.103 , IEC 60335-2-24 cl.22.7, etc.
It is used for various pressure-bearing products such as valves, water heaters, treated fabrics, etc. to carry out water pressure resistance, static pressure, blasting performance test and water sealing performance test.
System Features:
The test system adopts touch computer control, can print data and display pressure curve , can set test pressure, constant pressure time, pressure rise rate, etc.; adopts pneumatic water pressure booster pump and its pressure control device with stable performance, which is convenient for operation.
Technical Parameters:
Atmospheric pressure 80~106kpa; ambient temperature 5~40°C; relative humidity (20~80)%RH;
Use place: no rotation, no vibration, no electromagnetic interference, no dust, no explosive and no corrosive gas, with good heat dissipation
No.:
Contents
Parameters
1
Power supply
Single phase AC 220V or 120V, 50-60Hz
3
Operation interface
Touch type computer
4
Pressurized mode
Air pressure
5
Test pressure
0.5-2.5MPa
6
Hydraulic pressure control accuracy
±0.05MPa
7
Boost rate
Can be controlled to be 0.13MPa/s
8
Water temperature
10-60℃ controllable (accuracy ±1℃)
9
Constant temperature water tank volume
≥10L
10
Pressure apply or hold time
0-999999s can be set
11
Use environment
