Products
IEC 60529 2013 IPX1 IPX2 100L Stainless Steel Plate Waterproof Test Chamber
Products Description
IEC 60529 2013 IPX1 IPX2 100L Stainless Steel Plate Waterproof Test Chamber
Product Information For Waterproof Test Chamber:
The equipment is designed and manufactured according to IEC 60529: 2013 IPX1 and IPX2 requirements. Used to test the physical and other related properties of electrical and electronic products, lamps, electrical cabinets, electrical components, automobiles, motorcycles and their parts under simulated climatic conditions. After the test, determine whether the performance of the product meets the requirements, so as to facilitate product design, improvement, verification and factory inspection.
Equipment features For Waterproof Test Chamber:
1. Suitable for IPX1, IPX2 classification of waterproof test.
2. The shell is made of plastic-sprayed steel plate, beautiful and durable.
3. Dripping plate, inner cavity, turntable and other wading parts are made of SUS304 stainless steel to ensure long-term use without rust.
4. Drip box adopts vacuum design, high rust stainless steel structure; Nozzle base and needle can be separated, convenient needle installation and replacement.
5. The water supply pipe is equipped with a filter to filter impurities in the water and prevent clogging of the sprinklers.
6. With compressed air drying function, after the completion of the test, the excess water in the drip irrigation tank can be discharged to avoid scale blocking pinholes for a long time. (Note: the user needs to provide compressed air supply).
7. The turntable uses a decelerating motor, and the speed can be set on the touch screen to achieve the IPX1 test speed of 1 rpm, and the tilt device on the turntable can reach 15 ° for the IPX2 test.
Technical Parameters For Waterproof Test Chamber:
Model
SN443-1000L
Inner Chamber
1000mm*1000mm*1000mm
Outer Chamber
Approx. 1500mm*1260mm*2000mm
Outer Chamber Material
Spray treatment, concise, beautiful and smooth
Inner Chamber Material
High quality stainless steel plate
Weight
Approx.300KG
Turntable
Rotating Speed
1 ~5 rpm adjustable
Turntable Diameter
600mm
Turntable Height
Adjustable height: 200mm
Turntable Bearing Capacity
Max. 20KG
Turntable Function
IPX1 turntable parallel
IPX2 can achieve 15° by adding the incline device on the turntable
IPX1/2 Dripping
Dripping Hole Diameter
φ0.4 mm
Dripping Aperture Spacing
20 mm
IPX1, IPX2 Dripping speed (water flow)
1 +0.5 0mm/min(IPX1)
3 +0.5 0mm/min(IPX2)
Dripping Area
800X800 mm
Distance between Drip Box and Sample
200 mm
Electrical Control
Controller
LCD touch controller
Test Time
1-999,999min (can be set)
Turntable Control
Reduced motor, speed is stable
Oscillating Control
Stepping motor, oscillating tube swings stable
Flow and Pressure Control
Use manual valve to control flow and pressure, glass rotameters to indicate flow, stainless steel case spring pressure gauge to indicate pressure
Use Environment
Ambient temperature
RT10～35℃ (average temperature within 24H≤28℃)
Environment humidity
≤85%RH
Power supply
220V 50HZ single-phase three-wire + protection ground, protection ground contact resistance is less than 4 Ω; The user needs to configure the corresponding capacity of the air or power switch for the equipment at the installation site, which must be independent and dedicated for the use of the equipment.
Power
Approx. 3KW
Protection System
Leakage, short circuit, water shortage, motor overheating protection, alarm prompt
