Products
IEC 60529 IPX8 Water Ingree Testing Equipment Deep Immersion Test Tank
Products Description
IEC 60529 IPX8 Water Ingree Testing Equipment Deep Immersion Test Tank
Product introduction:
The high pressure water tank is used to verify the protective performance of the enclosure for electronic and electrical products, automobiles, motorcycle parts, household appliances, seals and lamps under continuous immersion in water at degree IPX8 as per IEC 60529:2013.
The water tank is made of stainless steel, the equipment is controlled by PLC, test parameters can be set on the touch screen directly, water supply and pressure are achieved automatically.
This complete set of equipment consists of a comprehensive control cabinet, IPX8 pressure vessel, and a stainless steel stair. The intelligent water supply and control system consists of a water supply tank, a water supply system, and a control system. The test water supply flow is controlled by PLC, frequency converter, and sensors.
Technical Parameters:
Brand: South, model no.: CHL2-40, 380VAC, 50Hz, 0.55kw
Protection class: IP55 Insulation class: F
φ600mm
Full height of the tank is 1500mm (From upper flange point to lower flange point is 1500 mm), the height of tank body is 1200mm
a. mechanical protection: spring-type safety relief valve
b. program control: the pressure exceeds the upper limit value, the pump will stop working and immediately release the pressure
Item
Specifications
Equipment power supply
Match client's local power supply requirements
Small water pump
IP code test range
IPX8 test
IPX8 pressure tank
Diameter and height
Pressure range
0.01~0.50Mpa
Tank material
SUS304 stainless steel
Pressurization method
Water pressure pressurization, the current pressure value is collected from the PLC from time to time, and the inverter controls the pump speed and frequency to pressurize, and the pressure is constant
Pressure sensor accuracy
0.5 grade
Limit pressure of safety valve protection
0.55 MPa
Pressure protection
Cover opening method
Can be lifted by the screw rod and moved laterally, and can be fully opened for convenient sample placement
Control
PLC control
Test time
Set according to the test standard (range 1-9999 seconds), the unit is: second
Stair
Stainless steel stair
