Products
IEC 60529 Protection Against Spraying And Splashing Water IPX3 IPX4 Spray Nozzle
Products Description
IEC 60529 Protection Against Spraying And Splashing Water IPX3 IPX4 Spray Nozzle
Standards compliant:
Technical parameters:
Made of aluminum, can be detachable
Note: the aluminum moving shield is easy to deform, pay attention during use
Structure:
This device is manufactured according IEC 60529 figure 5, it can achieve IPX3 / IPX4 hand-held spraying test by connecting water pipe.
It eEnsure that the water spraying and splashing speed reaches the standard required value by controlling the water supply flow, make the enclosure of the specimen to be splashed in all directions.
Normally we suggest to adopt the automatic control for IPX3/4 testing, if client has limit budget, the following easy installation for IPX3 and IPX4 testing is for reference:
Parameters of Spray Nozzle
Outer diameter: Ф102mm, spherical diameter: SФ75.5mm, 1 hole at the center, 2 inner circles of 12 holes at 30° pitch,4 outer circles of 24 holes at 15° pitch, total 121 holes of Ф0.5mm, made of brass.
Water Flow
10L/min±5% adjustable by flow meter (flow meter is not included in this item, should be prepared by user)
Pressure
50～150Kpa, the pressure gauge measuring range: 0～0.25Mpa
Moving Shield
