Products
IEC 60601-2-52 Rough Handling And Threshold Impact Test Device For Movement Parts Test
Products Description
IEC 60601-2-52 Rough Handling And Threshold Impact Test Device For Movement Parts Test
The length is not more than 150cm, the width is not more than 100cm (the distance between casters is not more than 80cm), and the height is not more than 150cm
1. Impact test on steps: move from left to right and impact the middle obstacle
Product Information:
1. Standard: conform to IEC60601-1:2012, YY9706.252-2021 clause 201.9.4.2.4.3 and 201.15.3.5, IEC60601-2-52:2015.
2. Samples and restrictions: Mobile ME equipment or moving parts of ME equipment.
3. Application: Whether the stress generated by mobile ME equipment or moving parts of ME equipment when subjected to rough handling and movement will cause unacceptable risks to the equipment, its mechanical strength shall be assessed. It is also used for the balance verification test of mobile ME equipment weighing more than 45kg crossing the door frame to test its stability.
4. Test principle: The motor-driven manipulator pushes the sample on the horizontal platform at a speed of 0.8m/s±0.1m/s to carry out the upper step impact test, lower step impact test, door frame impact test, and threshold crossing test.
5. Equipment structure and characteristics: The device includes an extended work surface (track), with a 40mm high step and a 40mm threshold (switching installation) arranged in the middle of the table, and a 40mm wide hardwood at the end; including a servo motor, reducer, and guide rail drive mechanism.
Technical Specifications:
Equipment dimensions
About: 4000×1300×1850 (mm) W×D×H
equipment weight
350kg
Usage environment
Power supply: AC220V±10%/50-60Hz, power 0.75KW
Station
Single station, can be customized
Electrical control method
PLC intelligent integrated control, color human-machine touch interface operation
Test size range
Drive mode
Servo motor + precision reducer drive
Specimen clamping method
Mechanical clamping
Test items and action processes
2. Step-down impact test: move from right to left, push down from the middle obstacle
3. Door frame impact test: move from the center to the right and impact the door frame obstacle.
4. Threshold impact test: move from left to right, impact the middle threshold
Linear stroke
0-3600mm, can be preset
Test speed
0-0.85m/s can be preset, can be preset (0.8±0.1m/s)
Test frequency
0~999999 times, can be preset
On step Impact test obstacle
40mm step, located in the middle of the platform, width 1000m
Down step impact test obstacle
Threshold
WDH=1000*80*10mm, fixed with 40mm step, switchable with 40mm step
Door frame impact test barrier
WDH=40mm×40mm×1500mm, located at the right end
Safety protection
Add guardrails around
