Products
IEC 61032 Test Probe 2 Figure 6 Ф12.5mm For Enclosures Against Ingress Test
Products Description
IEC 61032 Test Probe 2 Figure 6 Ф12.5mm For Enclosures Against Ingress Test
Product information:
This probe conforms to standard requirements of IEC 61032 test probe 2 figure 6, and required by many standards such as IEC 60529 for IP2 testing, IEC 60335-1, IEC 60065 and etc.
This test probe 2 is intended to verify the degree of protection of enclosures against ingress of solid foreign objects having a diameter of 12.5 mm or greater.
Techincal Parameters:
Please refer to the relevant standards.
Take IEC 60529:2013 clause 13.2 as an example:
The object probe is pushed against any openings of the enclosure with the force specified in table 7.
The test probe doesn’t have built-in force, if specific applied force required, the test probe should work together with a force gauge (use a force gauge to apply required force on the probe directly).
Notice
1. Please do not damage the appliance shape (such as scratching, bending, etc.).
2. Prevented from dust and moisture environment, in order to avoid the oxidation to affect the dimensional accuracy.
Parameters /Model
SN2210-6
Name
Test probe 2
Rigid Sphere Diameter (mm)
Ф12.5+0.05 0
Rigid Sphere Material
Steel
