Products
IEC 62133 Li-ion Battery and Cell Free Fall 1 M Pneumatic Drop Motor Lifting Test Equipment
Products Description
IEC 62133 Power Li-ion Battery and Cell Free Fall 1 M Pneumatic Drop Test Equipment
Overview:
This battery free fall testing machine applies for small consumer electronic products like mobile phone, mobile batteries, interphone, electronic dictionary, CD/MD/MP3, and components free dropping testing; specimen is automatically lift to pre-setting height, then free dropped onto a concrete plate.
Standards Compliant:
It is confirm to IEC62133:2017 clause 7.3.3, IEC62133:2012 clause 7.3.3, 8.3.3, IEC60086-4:2014 clause 6.5.6, IEC 60086-1, etc.
Technical Parameters:
300～1500mm
(can be customized. The range is controllable, with steel ruler, the min. indication value :1mm)
0～2kg
(can be customized)
220V 50Hz or 110V 60Hz
(can be customized)
Special test procedure as per IEC 60086-4:2014 clause 6.5.6:
The test batteries shall be dropped from a height of 1 m onto a concrete surface. Each test battery shall be dropped six times, a prismatic battery once from each of its six faces, a round battery twice in each of the three axes shown in Figure 5. The test batteries shall be stored for 1 h afterwards.
Clamping & Releasing Device for Specimen
Drop Height
Height Display
Stainless steel ruler (min.indicator value:1mm)
Drop Orientation
Face, edge, corner dropping
Loading Capacity
Specimen Max. Dimension
Drop floor material
Steel plate (hard wood board, marble board, acrylic board and cement board can be optional)
Machine Power
0.75KW
Drop method
Free fall through pneumatic dropping
Lifting method
Motor lifting
Power Source
Air Source
＜1mpa (prepared by client)
Control Method
Button Control
