Products
IEC60309-1 Vehicle Connectors And Plugs Fracture Capacity Vehicle Testing Equipment
Products Description
IEC60309-1 Vehicle Connectors And Plugs Fracture Capacity Vehicle Testing Equipment
Product Information:
The Vehicle Connectors and Plugs Breakage Resistance Tester meets the requirements of standards such as IEC60309-1 clauses 20 and 21 and IEC62196-1 clauses 7.11 and 7.12.
It is used to verify that electrical accessories such as electric vehicle charging interfaces, industrial plugs, sockets and couplers can withstand the mechanical, electrical and thermal stresses that occur during normal operation without excessive wear or other harmful effects.
Technical Parameters:
Applied standard
IEC IEC60309-1
Applied clause
Clause 20 and 21
Test station
Single
Control method
PLC intelligent integrated control, with color humanized touch screen
Drive mode
Servo motor drive
Sample clamping method
Mechanical clamping, the position of clamping point can be adjustable along the 3-axis fixture
Linear stroke
0-100mm, can be preset (the spacing between test plug and test socket≥ 50mm)
Conduction time
0-99.9s, can be preset (electrical contact should be maintained no more than 4s, no less than 2s)
Speed of Insertion and Separation
0-0.85m/s can be preset, default(0.8±0.1)m/s)
Test frequency
0-10 cycles/min, can be preset (3.75cycles/min=7.5 stoke/min)
Test cycles
0~999999 cycles, can be preset
Load power
External, providing standard required voltage, current and power factor, the load cabinet is optional
Optional load cabinet
Note: only with AC load cabinet, 0-70A, voltage 0-300V
Test contents
Device coupler/charging interface disconnect capability test
Device coupler/charging interface normal operating life test
Detection function
Open circuit alarms can be implemented during load tests and cycles can be recorded in real time.
Safety protection
Ground protection, short circuit protection
