Products
IEC60950-1 2005 1mL/Min Hot Flaming Oil Test Device Flammability Test
Products Description
IEC60950-1:2005 1mL/min Hot Flaming Oil Test Device Flammability Test
Product overview:
The equipment is used for testing the protective performance of the samples at the bottom of the fire protection shell of electrical and electronic products such as electronic instruments, electrical instruments, information technology equipment, electrical business equipment, etc. The heating ring heating spoon will heat 10mL of the specified performance (38MJ/L 0.845g/mL ~ 0.865g/mL) fuel oil until burning for 1min. Motor driven oil spoon rotation according to a certain height (100mm) and a certain flow (1mL/s) all smoothly poured in the sample (fire protection shell) in the center of the hole, in order to ignite the test product under the specified distance (50mm) and density (40g/m2) of the ignition bedding to evaluate the test product's fire protection performance.
The test chamber is equipped with a fume hood.
Comply with the standard:
GB4943.1-2011 "Information Technology equipment safety part 1: General requirements" article 4.6.2 and Appendix A.3
Technical parameters:
Iec60950-1:2005 Information Technology Equipment-safety-Part1 :General Requirements clause
4.6.2, Annex a. 3.
Parameter model
SN7713
Working voltage
Match client's local power supply requirements
Test oil
Average calorific value 38MJ/L, mass per unit volume between: 0.845g/mL～0.865g/mL, flash point: 43.5℃~93.5℃
Volume of ladle
>10mL
Hot flaming oil burning time
1 min (1s~999999s can be preset)
Hot flaming oil pouring speed
1 ml/s
Hot flaming oil pouring height
100mm
Hot flaming oil pouring time
10s (1s~999999s can be preset)
Ignition bedding material
Bleached CHEESECLOTH of approximately 40 g/m2
Distance between ignition bedding material and sample
Ignition bedding material is under the sample about 50mm
Test area background color
Black
Equipment size & weight
1130mm* 600mm* 1400mm, with a vent port of ф100mm, 147KGS
