IEC62133 Batteries Cells 20000 m/s2 Mechanical Acceleration Shock Crash Hazard Testing System

Overview:

This fully automatic shock test system is designed for measuring and ensure shock performance of products and packages. It can do normal shock test with half sine wave, square wave, sawtooth wave etc., simulate products under real environment shock conditions, thus improve the products and packages structure.

Standards Compliant:

It conforms to IEC62133:2017 clause 7.3.4, IEC62133:2012 clause 7.3.4, IEC60086-4 clause 6.4.4, IEC 60068-2-29, YD/T 2344.1 and etc.

Feature:

1. This automatic shock test system with Windows operating system, easy for

operation, operator only need to type into testing data, system will automatic configurate

parameters and control machine, finish shock test accurately.

2. With anti-re-shock brake device, shock table fall freely, when shock wave pad rebound,

hydraulic brake piston impact thus shock table braking, avoid secondary shock and achieve accurate shock data.

3. With effective vibration damping device; for large shock tester, when do shock testing it has large instantaneous impact force, this device largely reduced the shock impact to the floor, small than 350×350mm ones no need special foundation, easy for installation.

4. Digital setting of shock height, shock table automatically lifting, with high control accuracy and good repetitively.

5. Configured with shock measuring system, shock energy data and wave with real time

display.

6. With high acceleration generator, for small testing specimens which need high

acceleration shock test, able to fix high acceleration generator on shock table, it can obtain

higher acceleration than IS series shock tester according to impact energy transfer principle. For specimen smaller than 200×200mm the testing requirements is: peak acceleration 5000-50000m/s2, acceleration duration time 0.2~1ms.

Shock Test System Main Technical Parameters:

Function& Features	This hydraulic shock impact test system has the special designed control and measuring system
	Adopt USB2.0interfaceconnect with PC, transfer control signal and measuring data.
	With power cut off protection function, bench lifting height limitation function and pre-shock alarm function, safety reliable.
	Base on DSP high quality dynamic measuring, analyzing and control system, shock impact control system also professional for shock pulse and analyzing. Consist of control system, measuring system and Windows based software, hardware adopts module and low noise design, realized the circuit of control and measuring functions all in the interface cabinet, and with independent structure combination (control cabinet and measuring cabinet separate). Use USB2.0 communication, independent from PC. Applied for normal shock and heavy shock environment shock event capture, measuring and analyzing. Complied with standard ISO,MIL-STD,IEC,OEO,ASTM etc.
Technical Parameters	Input channel
	Input channel	With1input electric input channel
	Sampling Frequency	Max 200k
	Voltage Range	-10Vp～+10Vp
	Coupling Mode	Electric Mode
	ADC Resolution	16 bites
	Pulse Width	0.5-1,000ms
	Acceleration	5000g
	Dynamic Range	80dB
	Total Harmonic Distortion	<-95dB
	Signal to Noise ratio	>95dB
	Frequency Accuracy	0.01%
	Standard Compliance	ISO, MIL-STD-810, or customized standards
	External Trigger	With
	Mechanical Parameters
	Dimension	242mm×220mm×96mm
	Weight	2.5kg
Adaptive Digital Filter	Filtration type	Lowpass and high pass filter can use simultaneously
	Filtration Features	Able to set different filter channel for each.
	Low pass filtering parameter	No filtration, cut-off frequency, filter ratio
	High pass filtering parameter	Do not filter cut-off frequency
Ideal Wave	Wave type	Half sinusoidal wave, trapezoidal wave, final peak saw tooth shock pulse
	Standard Compliance	ISO, MIL-STD-810, or customized standards
	Auto Calibration	Automatically add the capture wave to ideal wave
	Verification	Auto comparison difference of captured wave and setting wave
	Display	Display the consistence of captured wave and setting wave
Trigger	Trigger Source	Simulate input channel, external trigger, non-trigger
	Trigger	Double Edge
	Trigger Level	1~99%Of Relative ideal wave acceleration
	Running Mode	Manual running, auto running.
	Auto Noise Reducing	Optional function, setting noise reducing percentage trigger edge: double edge
Data Saving	Memory Device	Data recording, signal store, content can be customized according requirements
	Re-display	Manual replay shock wave
	Data Output	Direct output to Excel report
WORD Test Report	According users setting automatically create word report, report content and format user can customize
Running Records	Software auto record the running process
Software interface (Half sinusoidal wave diagram)
Final Peak Sawtooth wave (Optional)
Trapzoidal Wave Optional
Half sinusoidal wave generator	Half sinusoidal wave generator mainly made of industrial rubber (considering the rubber strength and polymerization). Wave generator adopt cylindrical, normally with different thickness, as picture shows. Different thicknesses combined, with multi strength, realize different shock pulse width.