Products
IEC62196-1 Electric Vehicle Connector Pull Force And Torque Test Equipment
Products Description
IEC62196-1 Electric Vehicle Connector Pull Force and Torque Test Equipment
Equipment introduction:
This pull force and torque test equipment is used to test the vehicle plugs, and socket-outlets, connectors to withstand the specified pull force and torque.
It is designed and manufactured according to IEC62196-1: 2020 clause 25.3 Figure 17 and table 11, IEC60309-1: 2012 clause 23.3, etc.
Equipment Principle and Structure:
Pull is realized by single-phase speed-regulating motor to drive the eccentric mechanism, the motor speed is adjustable, to ensure the accurate time for each pull force applied; torque is achieved by releasing the torque weight by air cylinder.
Technical Parameters:
40N*2, 50N*1, 60N*1, 110N*1,250N*1
Can achieve 160N, 200N, 240N, 250N,500N pull force
6N*1, 7N*1, 12N*1, 15N*1, 23N*1, 110N*1
Can achieve 0.6N.m, 0.7N.m, 1.2N.m, 1.5N.m, 2.3N.m, 11N.m torque
How to select the corresponding pull force weight and torque weight?
Choose the proper weight according to following table:
Rated current
A
Pulling force
N
Torque
Nm
Maximum displacement mm
Operation Method
Button operation
Drive Mode
Motor and cylinder
Pull Force Weights
Torque Weights
Torque Arm
Ф200mm
Pull Frequency
1 cycle/s
Pull Cycles
1-999999 cycles, can be preset, default 100 cycles
Torque Applied Time
0-99999.9S, can be preset, default 1 min
Fixture
One set of universal fixtures
Equipment Dimensions & Weight
L 1560mm*W 600mm*H 1530mm, approx. 220KG
Power Supply
Single phase AC220V±10%, 60Hz, 10A
Pull weight+ torque weight selection
10-20
160
0.6
160N+6N
2
32
200
0.7
200N+7N
2
63
240
1.2
240N+12N
2
80
240
1.2
240N+12N
2
125
240
1.5
240N+15N
2
200
250
2.3
250N+23N
2
250
500
11
500N+110N
5
400
500
11
500N+110N
5
