Products
Lamp Holders Rotational Torque Test Apparatus For Screwed Luminaires IEC 60598-1
Products Description
Lamp Holders Rotational Torque Test Apparatus For Screwed Luminaires IEC 60598-1
Standards For Lamp Holders Rotational Torque Test Apparatus:
IEC 60598-1:2014 “Luminaries-Part1: General requirements and tests” clause 4.12.4
Technical Parameters For Lamp Holders Rotational Torque Test Apparatus:
Can be used to process torque test for lamp caps, test lampholders can be equipped, E27, E26, B22d, E14, E10, E40, B15 test lampholders are optional.
Test Principle For Lamp Holders Rotational Torque Test Apparatus:
Adopt electronic torque sensor, the torque value can be measured and displayed in real time, operator manually rotates the light source, test torque is applied for 1 min in a clockwise and anti-clockwise direction, then check the displayed torque indication value on the LCD.
Application For Lamp Holders Rotational Torque Test Apparatus:
To test the influence of the rotational torque on the lampholders during the replacement of the light source.
Torque Display
Digital display, torque range: 0-10N.m, with maximum torque hold function, upper limit alarm can be set
Lampholders Clamp
The lampholder is fixed with the clamp, operator directly rotates the opposite light source to measure the positive and negative torque of the lampholder
Extended Function
Use Environment
AC220V,50Hz
Structure
Digital display, with a clamp for lamp holders
