IEC60529 IP Code Degrees Ingress Protection IPX1 To IPX8 Test System
IEC60529 IP Code Degrees Ingress Protection IPX1 To IPX8 Test System
- Model：
IEC60529 IP Code Degrees Ingress Protection IPX1 To IPX8 Test System
Product Introduction:
The water-proof testing equipment is manufactured in accordance with the standard of Clause IEC60529 IPX1 to IPX8 testing purpose.
The machine is provided with standard test program, which is available to be selected for testing purpose without any presetting. There is also provided with user-defined program, the test parameters can be defined in compliance with deferent test standard. The loading platform can be inclined 15° to meet with IPX2 inclined testing requirement.
Include the following test items:
1. Vertical rain-drop tester (IPX1, IPX2) DP-1
2. Oscillating Tube Tester ( IPX3, IPX4) SSW-1
3. Spray Nozzle ( IPX3, IPX4) SN-1
4. Handheld Jet Nozzle ( IPX5, IPX6)SN-2
5. Smart Water Supply And Control System ( IPX7) WCS-1
6. IPX8 Water Tightness Pressure Tester WTP-1
7. Tiltable Rotating Stage TS-1
1. Vertical Drip Rain Testing Machine DP-1
Description
This test device is to verify Protection against Vertically Falling Water Drops. It is designed and manufactured in accordance with the standard requirement of IEC60529 clause IPX1 and IPX2.
The rise and fall of the drip box is controlled by the motor. It is equipped with the rotatable objective table whose rotating speed is 1r/min for IPX1 test; It is also equipped with 15°bevel for supporting sample for the IPX2 test.
1. Stainless steel fine filter for dirt filtration.
2. Using compressed air to blow the needle water, to prevent water reactive substances and atmospheric blocking needle. (The air compressor is not included).
3. Stainless steel general medical needle nozzle, easy to buy, not easy to rust.
4. Needle nozzle and needle nozzle seat using taper connection, can be easily replaced without the tool, individual damage to the needle nozzle can be easily replaced quickly.
Specifications
| Application | Applies to conduct IPX1, IPX2 testing. |
| Rain area | 1000mmX1000mm |
| Tank material | Stainless steel |
| Dripping aperture | ￠0.4mm |
| Hole distance | 20mm |
| Rainfall Flow | 1mm/Min,3mm/Min, user-set parameters (error: + 0.5mm / min). |
| Water dripping height | 200mm (automatically control by the test equipment) |
| Test time | 10Min, can be set according to the need |
| Draining | Automatically emptying the tank water after the test is completed |
| Diameter of turntable | Φ600mm |
| Rotating speed of the turntable | 1r/min |
| Body material | Industrial aluminum alloy |
| Control | Electric chamber |
| Dimensions (LxDxH) | 1100X1200X2600mm |
| Machine structure | Wall Mount |
| Air compressor (Optional, not included) | Silent air compressor |
2. Oscillating Tube Tester for IPX3 and IPX4 SSW-1
Product information:
Oscillating tube tester is designed and manufactured in accordance with the standard requirement of IEC60529 IPX3 and IPX4. It is used for the waterproof test of the electrical equipment.
The oscillating tube part of this device is controlled by adjustable-speed motor and crank-link mechanism. This device is reciprocating swing from the place of ±60°to another one of ±175°with the speed required by the standard through machine adjusting angle.
The angle adjustment is accurate. The structure is stable and durable. It is equipped with rotating stage through which the rotating of 90°can be achieved. It is also equipped with clean water filtration unit to prevent the pinhole from jamming.
Technical parameters:
| No. | Item | parameters |
| 1 | Water supply | Water flow rate＞10L/min±5% clean water without inclusion. This device is equipped with clean water filtration unit |
| 2 | The size of the oscillating tube | Come with R400, R600, R800 oscillating tube (R200,R1000,R1200,R1400,R1600mm can be optional), stainless steel |
| 3 | Water hole | Φ0.4mm |
| 4 | Included angle of two holes | IPX3:120°; IPX4:180° |
| 5 | pendulum angle | IPX3:120°; IPX4:360° |
| 6 | Raining speed | IPX3:4s/time(2×120°); IPX4:12s/time(2×360°); |
| 7 | Water flow | Can be set according to the size of the pendulum and the number of the pin holes (0.07 L/minX per hole) |
| 8 | Testing time | 0.01S～99 hours 59mins,can be preset |
| 9 | Pressure gauge | 0~0.25MPa |
| 10 | Site requirements | Dedicated IP waterproof test room, The ground should be flat with illumination 10A waterproof leakage switch(or socket)used for equipment. With good function of inflow and drainage. Ground installation |
| 11 | The area | According to the oscillating tube chose |
5. Smart Water Supply And Control System WCS-1
Product information:
The smart water supply and control system is designed and manufactured in accordance with the standard requirement of IEC60529 IPX1~IPX8 and related requirement of IEC 60598. It is used for waterproof test of the electric appliance, such as the luminaires.
Technical parameters:
1. The smart water supply and control system is applicable to:
(a) Water supply for IPX1~IPX6 waterproof test
(b) IPX7 water immersion test
(c) Water storage for IPX8 water tightness test
(d) Automatic control for the whole waterproof equipment
2. Water supply method: constant temperture water supply, constant flow water supply, constant pressure water supply
3. Water supply control process: After user preset the water temperature value, water flow value and water pressure value on the touch screen, the temperature control system, electronic meters or digital pressure gauge real-time monitor the current values, read the values into PLC through the data conversion, then automatically adjust the rotational speed of pump through the frequency converter.
4. Water tempreture control: PID system automatically control and detect water tempreture, range: room temperature ~ 95℃ (±1℃).T
5. There are large flow and small flow two ways water supply.
6. Large flow water supply:
(a) It is applicable to IPX5~IPX6 strong water spray test and water injection of IPX8
(b) Flow range: 10~100L/min
(c) Flow accuracy: ±0.5L/min
(d) Flowmeter: LWGY-15 type turbine flowmeter
(e) Water pump: CHL8-60L6WBC type stainless steel centrifugal pump
7. Small flow water supply:
(a) It is applicable to IPX1~IPX4 waterproof test
(b) Flow range: 1~10L/min
(c) Flow accuracy: ±0.5L/min
Flowmeter: LWGY-4 type turbine flowmeter
(d) Water pump: CHL2-30L6WBC type stainless steel centrifugal pump
8. Water storage tank:
(a) It is applicable to water storage of IPX5~IPX6 strong water spray test, water injection of IPX8, IPX7 immersion
(b) Volume: 550L
(c) Dimension: W600mmXD660mmXH1400mm
(d) Observation window: toughened glass window
(e) Observation window dimension: W200mmXH1250mm
(f) Depth gauge: stainless steel
(g) Depth gauge height: 1300mm, accuracy1mm
(h) Liquid level control: float switch + overflow pipe
9. IPX7 immersion automatic lift bracket
(a) Lifting distance: 0~1250mm
(b) Bracket dimension: L400mmXW400mm
(c) Bracket load weight: 50Kg
10. Control of IPX8
(a) Pressure range: 0~0.6Mpa
(b) Time range: 0~999999s
11. Control Cabinet:
(a) Flow detection: flow signal feedback through electronic flowmeter
(b) Flow setting: set on touch screen
(c) Temperature detection: PID
(d) Controller: Mitsubishi PLC
(e) Friendly interface: 7 inch, color touch screen
(f) Control Function: constant temperature water supply, constant flow water supply, constant pressure water supply, and test time control.
(g) Protection function: leakage protection, overload protection, short circuit protection
12. Filter: stainless steel shell, fine filter core
13. Body material: industrial aluminum alloy
14. Outer dimension: 1400mmX750mmX1600mm
15. Power supply: AC 380V, 50HZ
Ingress Protection Test EquipmentIngress Protection Test Equipment
Ingress Protection Test EquipmentIngress Protection Test Equipment
Ingress Protection Test EquipmentIngress Protection Test Equipment
