IP4X 1.0mm Wire Ingress Protection Test Equipment Against Access To Hazardous Parts

Model：

Test Wire Probe D HT-I04

Description:

This wire probe is intended to verify the protection of persons against access to hazardous parts. It is also used to verify the protection against access with a wire.

Confirm to standards:

IEC 60529 IP4X;

EN 60529 IP4X;

IEC 61032-1 Figure 4;

IEC 60065 and so on.

Test sample: Easily accessible enclosure live parts or mechanical parts.

Feature: It can be used for anti-electric shock test when equipped with amphenol connector. Or used for enclosure protection test when open threaded hole of M6 at the end of the handle (connected with pull and push dynamometer) .The probe whose model number is with "T" is with force.

Technical parameters:

Model	HT-I04	HT-I04T
Name	Test rod probe D	Test rod probe D with force
Probe diameter	1.0mm	1.0mm
Shpere diameter	35mm	35mm
Handle diameter	10mm	10mm
Handle length	100mm	-
Test force	-	With force of 1N
Applied standard	IEC 61032-1	IEC 60529

Ingress Protection Test EquipmentIngress Protection Test Equipment