Products
Turntable For Anechoic Chamber EMC Test Equipment 2m Diameter
Products Description
φ2m Turntable for Anechoic Chamber 1000 kg Weight Bearing
Product overview:
This is a high-quality electric turntable, the installation plane of the turntable is level with the plane of the reflective floor, and the turntable and the reflective ground are connected by a contact ring, have good electrical continuity. In addition to the circular opening in the middle of the turntable for cable connection, the remaining surface is completely shielded and sealed, the disturbance value during operation is less than CISPR 22 Class B limit 10dB, it can withstand continuous field strength of 200V/m and instantaneous field strength of 600V/m.
Technical Parameters:
(1) Diameter: 2m;
(2) Countertop: stainless steel;
(3) Weight bearing: 1000kg;
(4) Rotation speed: 0.5~2r/pm adjustable;
(5) Angle range: -200°～ +400°;
(6) Positioning accuracy: less than 1°;
(7) Electric control: optical fiber transmission;
(8) An interface board is set in the middle of the turntable, and all the RF cables for power supply and calibration of the tested equipment, and the signal line connectors for testing are installed on the interface board in the center of the turntable to reduce measurement errors;
(9) Will match with client system’s control software (need to confirm which kind of system control software client’s anechoic chamber).
Turntable diameter
2m
Turntable countertop
stainless steel
Weight bearing
1000kg
Rotation speed
-200°～ +400°
Angle range
180×180mm,12-30g/m2
Positioning accuracy
Less than 1°
Electric control
Optical fiber transmission
Compatible software
Germany RS or can be customized to match client's EMC test software
