1. Location
  2. Home
  3. News
  4. Media coverage

IEC62368 Three Vertical Bar Signal , Three Vertical Bar Signal Shall Be Used As Defined In 3.2.1.3 Of IEC 60107-1:1997

2021-12-03 20:09:12 admin

Three vertical bar signal’ shall be used as defined in 3.2.1.3 of IEC 60107-1:1997

3.2.1 .3 Three vertical bar signal
The three vertical bar signal produces three equidistant vertical white bars on a black background. The width of each bar is 1 /6 times the nominal horizontal width ( W ) of the picture.
A line-time waveform of the signal is shown in figure 9. This signal has an APL of 50 % and includes the reference white level. It is suitable for setting the output signal level and the luminance level of white For the SECAM measurements, the subcarrier with the frequency and amplitude corresponding to black and white is superimposed on the signal.
The same bar width can be applied for the wide aspect ratio picture.

IEC62368 Three Vertical Bar Signal , Three Vertical Bar Signal Shall Be Used As Defined In 3.2.1.3 Of IEC 60107-1:1997 0\



We strongly condemn autostrong for not respecting intellectual property rights and stealing pictures. We reserve relevant legal rights and interests. Please pay attention to it
IEC62368 Three Vertical Bar Signal , Three Vertical Bar Signal Shall Be Used As Defined In 3.2.1.3 Of IEC 60107-1:1997
Aluminium ring | IEC 62368 Edition 3, CDV status | IEC 62368 Edition 3-figure48
Steel disk | IEC 62368 Edition 3, CDV status | IEC 62368 Edition 3-figure47
可能是包含下列内容的图片：上面的文字是“UL1439 Sharp Edge Tester IEC62368 Figure V.3 Blunt Probe IEC62368 Figure V.5 Terminal Probe IEC62368 Figure V.2 Jointed Test Probe IEC62368 Figure V.1 Jointed Test Probe IEC62368 Figure V.4 Wedge TiCO Probe θα Generator LV2000Tgdd Disc EC62368 Figure 48 Aluminium Rina IEC62368 Figure 49 Aluminium Foil Heating Drying Oven Vacuum Drying Chamber ↑】”



Recommended content